sap 9/1/8

Post Reply
mike18

sap 9/1/8

Post by mike18 »

Hi Everyone,

Under VPLS I see
sap 9/1/8:100 create

Does 9/1/8 mean slot/mda/port?

Regards
Mike
Stoffen
Member
Posts: 153
Joined: 23 May 2014 05:32
Location: Norway

Re: sap 9/1/8

Post by Stoffen »

Hi.
Yes it does :)
[flash=]
Christoffer

Network System Expert Norway
Nokia SRA #265
Alcatel-Lucent SRC 3RP Certified #552
Alcatel-Lucent SRC NRS-2 Certified #1104
Huawei HCNP Routing & Switching certified
Cisco CCNP Certified
LinkedIN
[/flash]
mike18

Re: sap 9/1/8

Post by mike18 »

Many thanks Christoffer.
mike18

Re: sap 9/1/8

Post by mike18 »

And 100 here is subinterface of physical interface or it is referring to the vlan?
mivens
Member
Posts: 262
Joined: 28 Sep 2012 06:34

Re: sap 9/1/8

Post by mivens »

Traffic to/from SAP 9/1/8:100 is tagged with dot1q VLAN ID 100 on the physical port 9/1/8.

In SR OS an interface is configured separately and then associated with a SAP. You configure the IP address on the interface.

Take a look at the section "Service Access Points" in the Services Guide
mike18

Re: sap 9/1/8

Post by mike18 »

Many thanks Mivens

Regards
Mike
Post Reply

Return to “7750 SR”