Pomoc Alcatel 4028 přes router (mapování portů)

Post Reply
78CeL78

Pomoc Alcatel 4028 přes router (mapování portů)

Post by 78CeL78 »

Zdravím,
pracuji z domu a do práce jsem připojený přes internet. Používám Alcatel 4028.
Několik let jsem telefon používal, přes mapování portů. Stačilo na routeru povolit port 5001 a telefon fungoval výborně. Pak udělali upgrade ústředny a telefon se mi připojí do práce. Telefon funguje, ale nikoho neslyším i když běží hovor. Já slyším ty co mi volají, ale oni mě ně. Zkusil jsem povolit rozsah portu 1..65535. Ale stále nikoho neslyším a oni mě normálně.
Poradí někdo?
cavagnaro

Re: Pomoc Alcatel 4028 přes router (mapování portů)

Post by cavagnaro »

English please. Now not even translator can help as no clue what language this is

Enviado de meu E6633 usando Tapatalk
78CeL78

Re: Pomoc Alcatel 4028 přes router (mapování portů)

Post by 78CeL78 »

Hallo,
I work from home and my phone Alcatel 4028 is conected via internet to Employer.
Few years i was used map ports. In router I set port 5001 for IP with Alcatel 4028 in my network and all OK.
Now Alcatel upgrated server of my Employer.
My Alcatel 4028 can connect to my Employer, but i can not use Alcatel 4028.
I can make phone calls. Everyone can hear me, but I do not hear anybody.
Than i change map ports 1:65535 for Alcatel 4028 IP.
But no change. I can make phone calls. Everyone can hear me, but I do not hear anybody.
When I use Pimphony (software phone)
I can make phone calls. Everyone can hear me, and I do hear Everyone.
User avatar
murraya
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 900
Joined: 16 Oct 2007 02:35

Re: Pomoc Alcatel 4028 přes router (mapování portů)

Post by murraya »

Czceh?
Best Regards
Murray

ACSE 10.0 corporate
ACSE 6.x IPT data
cavagnaro

Re: Pomoc Alcatel 4028 přes router (mapování portů)

Post by cavagnaro »

Sounds like an RTP issue. When you did the upgrade, something else changed? IP address of something? Another device?

Enviado de meu E6633 usando Tapatalk
cavagnaro

Re: RE: Re: Pomoc Alcatel 4028 přes router (mapování portů)

Post by cavagnaro »

murraya wrote:Czceh?
No clue buddy...if we were to guess all languages people are from...would be a never end

Enviado de meu E6633 usando Tapatalk
78CeL78

Re: Pomoc Alcatel 4028 přes router (mapování portů)

Post by 78CeL78 »

After upgrade nothing changed. I dont hear nothnig (signals, warning, vopices), other functions are OK. Devices are not changed.

1) A few years everything worked with mapping port 5001.
2) Alcatel upgraded employer´s server. Did not change anything on the equipment.
3) I dont hear nothnig (signals, warning, vopices), other functions are OK
4) I tried to redirect all ports for the phone.
5) I dont hear nothnig (signals, warning, vopices), other functions are OK
6) I tired Phone connect directly to the Internet (without a router)
7) I dont hear nothnig (signals, warning, vopices), other functions are OK
8) I tired change router
9) I dont hear nothnig (signals, warning, vopices), other functions are OK
10) I took the router to the employer and connected to the network. (LAN)
11) Phone is OK. I hear everything and everything works perfect.
12) Connect phone at home via internet.
13) 9) I dont hear nothnig (signals, warning, vopices), other functions are OK
Post Reply

Return to “Beginner's questions about the Common Hardware”