Got output on VMWare console (No Piped Proxy Needed)

[johank_DUP]

Well, You still need Piped proxy to do the initial installation of the Call Server.

I am running VM Ware Server Console Ver. 1.0.4 build-56528

Once the CPU has booted up (You don't have to start RUNTEL) do the following:

Login as root (su) and use a text editor like "vi"
Modify the following files: menu.lst & inittab

[root@xa001001 mtcl]# vi /boot/grub/menu.lst
[root@xa001001 mtcl]# vi /etc/inittab

{ Using "vi" editor:
- Use Enter to scroll down
- "space" to move sideways
- "i" to start edit on text
- "esc" key to stop edit
- Shift-Q to enter "save/exit" mode
in "save/exit" mode - "w" to wright/save
- "q" to quit }


To look like these Egsamples:

(E)xa001001> more /etc/inittab
#
# inittab This file describes how the INIT process should set up
# the system in a certain run-level.
#
# Author: Miquel van Smoorenburg, <miquels@drinkel.nl.mugnet.org>
# Modified for RHS Linux by Marc Ewing and Donnie Barnes
#

# Default runlevel. The runlevels used by RHS are:
# 0 - halt (Do NOT set initdefault to this)
# 1 - Single user mode
# 2 - Multiuser, without NFS (The same as 3, if you do not have networkin
g)
# 3 - Full multiuser mode
# 4 - unused
# 5 - X11
# 6 - reboot (Do NOT set initdefault to this)
#
id:3:initdefault:

# System initialization.
si::sysinit:/etc/rc.d/rc.sysinit

l0:0:wait:/etc/rc.d/rc 0
l1:1:wait:/etc/rc.d/rc 1
l2:2:wait:/etc/rc.d/rc 2
l3:3:wait:/etc/rc.d/rc 3
l4:4:wait:/etc/rc.d/rc 4
l5:5:wait:/etc/rc.d/rc 5
l6:6:wait:/etc/rc.d/rc 6

# Things to run in every runlevel.
ud::once:/sbin/update

# Trap CTRL-ALT-DELETE
ca::ctrlaltdel:/sbin/shutdown -t3 -r now

# When our UPS tells us power has failed, assume we have a few minutes
# of power left. Schedule a shutdown for 2 minutes from now.
# This does, of course, assume you have powerd installed and your
# UPS connected and working correctly.
pf::powerfail:/sbin/shutdown -f -h +2 "Power Failure; System Shutting Down"

# If power was restored before the shutdown kicked in, cancel it.
pr:12345:powerokwait:/sbin/shutdown -c "Power Restored; Shutdown Cancelled"


# Run gettys in standard runlevels
1:2345:respawn:/sbin/mingetty tty1
2:2345:respawn:/sbin/mingetty tty2
# 3:2345:respawn:/sbin/mingetty tty3
# 4:2345:respawn:/sbin/mingetty tty4
# 5:2345:respawn:/sbin/mingetty tty5
# 6:2345:respawn:/sbin/mingetty tty6

# Run xdm in runlevel 5
# xdm is now a separate service
x:5:respawn:/etc/X11/prefdm -nodaemon

ls:S:respawn:/sbin/sulogin

# Alcatel+
S0:2345:respawn:/sbin/dhsgetty 19200 -L ttyS1 vt100
# Alcatel-







_________________________________________________________________





(E)xa001001> more /boot/grub/menu.lst
#
# Do not edit this file: automatically generated at installation time
#
# Generating command: /boot/grub/grubinstall '0' '0' '4' --menu
#
#
# DHS3 boot menu configuration file, before postprocessing (see grubinstall
)
#

# Configuration of the serial line (default conf)
serial --unit=0 --port=0x3f8 --speed=9600 --word=8 --stop=1 --parity=no
serial --unit=1 --speed=19200

# Select serial line for GRUB prompting (no delay before printing the
# menu out)
terminal --timeout=0 console
# Boot automatically after 5 secs.
timeout 5

# autoboot
# By default, boot the first entry.
default 0

# Fallback to the second entry.
fallback 1

# For booting Linux
title Boot GNU/Linux [default]
# uppermem 132072
root (hd0,4)
kernel /boot/vmlinuz root=/dev/hda5 console=ttyS1,19200 console=tty1 panic=
5 alc_cpu_id_setup=0xC0
# initrd /boot/initrd.img

# For installing GRUB into the hard disk
title Install GRUB into the hard disk
root (hd0,4)
setup_dhs3 (hd0) (hd0,0)
(E)xa001001>

[4400Guru]

There's a much easier way to do this! Install OXE as a blade server!

[johank_DUP]

WOW! That is much easier. Thanks

[mothinx]

Yes ! Blade server work withou piped proxy

But, for frenchies you would like having an "azerty" keyboard.

Use this command:
loadkeys fr